(615) 763-6227 brad@bylerindustrialtool.com
Facebook Instagram
Precision grinding equipment at the Byler Industrial Tool facility — Lyles, TN

Lyles TN Industrial Blade Sharpening

Most production shops replace carbide blades and router bits they could sharpen 8–15 more times — Byler Industrial Tool restores them to factory spec so operations cut tooling costs by up to 90% without losing a single shift.

Byler Industrial Tool provides mail-in blade, bit, and knife sharpening to factory spec for Lyles, TN woodworking, metalworking, and plastics shops — ship from Lyles and get it back in 2 weeks.

Blade sharpening runs 10–20% of new-blade cost per cycle · Free shop audit

  • 43 miles from Erin — ~1.25 hrs drive, or any carrier
  • Freud Certified — technicians restore factory geometry
  • 8–15 sharpenings — per blade before plate retirement
  • 2-week turnaround — any carrier, all 50 states
  • 100% satisfaction guarantee — on every job

Serving Lyles, TN shops from Erin, Tennessee, 43 miles away.

Or call (615) 763-6227

90% Cost Savings vs. Replacement
8–15× Re-Sharpenings Per Blade
50 States Served Nationwide
Serving Lyles

Industrial Blade Sharpening for Lyles, TN

Distance and transit

Lyles, TN is 43 miles (~1.25 hrs by road) from Byler's Erin, Tennessee facility. Ship by any carrier and the standard turnaround on mail-in orders is 2 weeks. Byler returns orders by UPS Ground, prepaid and added to your invoice, unless you supply your own UPS or FedEx account number. At this distance you can also bring tooling to the Erin facility directly (Mon-Fri, 8:00 AM - 5:00 PM).

Industrial areas and major plants around Lyles

  • Shipps Bend Industrial Site (Centerville) — 49-acre public Select Tennessee certified site at State Highway 50 West and Broome Lane in Centerville, the Hickman County seat
  • Dickson County Industrial Park — Neighboring Dickson County park that hosts Mohawk/Dal-Tile's ceramic tile plant (announced 2014, $180M, 320 jobs)

The local industry

MTIDA lists two Lyles employers: Clark Container (plastic packaging) and Sole Supports (custom orthotics). A tool and die service is listed in Lyles under industrial support services (2026)

Freeman Wood Products (specialty pallets) and Fabrication Specialties Corp. (skids and wood pallets) are Hickman County pallet makers (2026)

Tubular Steel US (steel tubing), Accurate Energetic Systems (explosives) and Lilja Corporation (industrial furnace construction) operate in Hickman County (2026)

Woodworking shops running carbide saw blades, router bits, and moulder knives can send the whole tooling mix to one certified facility.

The Process

How It Works for Lyles

01

Ship From Lyles

Lyles is 43 miles (~1.25 hrs) from the Erin, TN facility. Pack your tooling and ship by any carrier.

02

We Restore It to Spec

Freud Certified technicians restore your tooling to original manufacturer specification.

03

Back in Production

Tooling returns within 2 weeks, sharp, verified, and backed by Byler's 100% satisfaction guarantee.

Request a Quote

Industrial Blade Sharpening Pricing

Carbide circular saw blade$200–$600 new · 10–20% per cycle · 8–15 sharpenings
Carbide tipped router bit$20–$80 new · 15–30% per cycle · 3–5 sharpenings
Solid carbide spiral router bit$40–$200 new · 20–40% per cycle · 3–7 regrinds
Custom moulder knife20–40% below OEM catalog pricing on non-standard profiles · 8–12 resharpenings
  • $25 minimum order on Byler's sharpening order form
  • Returned by UPS Ground, prepaid and added to your invoice, unless you supply your own UPS or FedEx account number
  • Payment: credit card or purchase order
  • Free shop audit & cost savings analysis for production shops
  • 2-week standard turnaround on mail-in orders, all 50 states

What the order form asks for on each item:

  • Quantity of each item
  • Diameter (saw blades) or diameter and length (bits, cutters, knives)
  • Description: tooth count and brand for saw blades; flutes or wings and knives per set for bits and knives
Request a Quote

Lyles shops: stop replacing tooling Byler can restore. Request a quote today.

Request a Quote
Lyles Shops Ask

Industrial Blade Sharpening in Lyles, TN — Local Questions

How far is Lyles, TN from Byler, and how do shops there get tooling to Erin?

Lyles, TN is 43 miles (~1.25 hrs by road) from Byler's Erin, Tennessee facility. Ship by any carrier; the standard turnaround on mail-in orders is 2 weeks, and it applies in all 50 states. Direct drop-off at the Erin facility is also possible.

Can shops at Shipps Bend Industrial Site (Centerville) use Byler?

Yes. Byler serves production shops in all 50 states by mail, so a shop at Shipps Bend Industrial Site (Centerville) ships to the Erin, Tennessee facility the same way any other customer does. Ask about Byler's free shop audit and cost savings analysis at (615) 763-6227.

How does industrial blade sharpening fit the industries around Lyles, TN?

MTIDA lists two Lyles employers: Clark Container (plastic packaging) and Sole Supports (custom orthotics). A tool and die service is listed in Lyles under industrial support services (2026). Woodworking shops running carbide saw blades, router bits, and moulder knives can send the whole tooling mix to one certified facility.

Byler Industrial Tool Guarantee

Every blade, bit, and knife Byler sharpens ships with a 100% satisfaction guarantee. If your tooling does not perform to specification after reconditioning, Byler resolves the issue — no debate, no delay. That guarantee applies to every job, every brand, and every customer regardless of location.

Services for Lyles

Every Tooling Service Available to Lyles, TN

Lyles TN Carbide Circular Saw Blade Sharpening

Full carbide tooth restoration to OEM geometry for production circular saw blades.

Lyles TN Carbide Circular Saw Blade Sharpening →

Lyles TN Custom Moulder Knife Manufacturing

Precision moulder knife production to customer profiles for millwork and flooring operations.

Lyles TN Custom Moulder Knife Manufacturing →

Lyles TN Solid Carbide Spiral Router Bit Sharpening

Spiral geometry restoration on solid carbide router bits for CNC and production routing.

Lyles TN Solid Carbide Spiral Router Bit Sharpening →

Lyles TN Carbide Tipped Router Bit Sharpening

Carbide tip reconditioning on tipped router bits — restores cutting edge to factory tolerance.

Lyles TN Carbide Tipped Router Bit Sharpening →

Lyles TN Industrial Knife Sharpening

Industrial knife reconditioning for food processing, packaging, and manufacturing applications.

Lyles TN Industrial Knife Sharpening →

Lyles TN HSS Cold Saw Blade Sharpening

High-speed steel cold saw blade restoration for metal cutting operations and fabrication shops.

Lyles TN HSS Cold Saw Blade Sharpening →

Lyles TN Chipper Blade Sharpening

Chipper blade reconditioning for wood processing, mulching, and biomass operations.

Lyles TN Chipper Blade Sharpening →

Lyles TN Insert Tooling

Insert tooling reconditioning and indexable insert services for production machining applications.

Lyles TN Insert Tooling →

Lyles TN PCD Tooling

Polycrystalline diamond tooling reconditioning — precision PCD edge restoration for composite and hardwood cutting.

Lyles TN PCD Tooling →

Lyles TN Industrial Strapping

Industrial strapping products and services for securing production loads and shipments.

Lyles TN Industrial Strapping →

Also Serving Nearby Communities

Dickson TN Industrial Blade Sharpening Centerville TN Industrial Blade Sharpening Franklin TN Industrial Blade Sharpening Columbia TN Industrial Blade Sharpening Hohenwald TN Industrial Blade Sharpening Nashville TN Industrial Blade Sharpening

Cities We Serve — Industrial Blade Sharpening

Tennessee

Middle Tennessee
East Tennessee
West Tennessee

Kentucky

South Central Kentucky
Western Kentucky
Louisville Metro
Bluegrass Kentucky

North Carolina

Catawba Valley / Western NC
Piedmont Triad
Charlotte Metro

Lyles Shops:
Stop Replacing Tooling. Byler Restores It.

Request a Quote Call (615) 763-6227